This page is a part of ProFTP online Help Manual.
|< previous | content | next >|
The Keyboard Mapping file has two sections, [KEYS] and [COMPOSERS_XKK], each consisting of keysym statements and possible comments. Text entered after a ';' sign is ignored and will be treated as a comment.
A keysym specification uses a set of standard X numbers to describe a symbol. For example, a lowercase 'a' has a special number code.
In the [KEYS] section, each keysym statement associates a set of one to four keysyms with a physical key.
Synopsis of a statement is:
KEYnn = keysym1 [, keysym2 [, keysym3 [, keysym4]]]
'nn' is the identifying number of a PC's key. Every PC's key has an entry in the section. The entry name is the text KEY followed by the decimal ScanCode number (key_number) and followed by the letter 'E' if the key has the extended flag set.
keysym1 is the keysym associated with the key in a non-shifted state (Normal). This is the only parameter that must be entered.
keysym2 is the keysym associated with the key when the key is Shifted.
keysym3 is the keysym associated with the key when a Mode-Shift key is pressed (Alt-Gr).
keysym4 is the keysym associated with the Shift + Mode-Shift sequence (Shift + Alt-Gr).
A Mode-Shift is a physical key which has a keysym value of 0xFF7E, (predefined as the ModeSwitch symbol), and which is assigned to one of the modifiers MOD1 to MOD5.
A full keysym specification consists of four numbers, each of which is in the range of 0 through 255 decimal (or 0x00 through 0xFF hex). The standard predefined X keysyms use only the third and fourth numbers. The first two numbers are assumed to be zero.
ProFTP accepts keysyms in the following three formats:
two of the four possible components are omitted. The keysym will be interpreted as
In the dotted notation, the two lines below both represent the same keysym:
represents the values 0xFF and 0x20. The keysym is interpreted as follows:
Predefined symbols can be used instead of the keysym formats described above. The following three symbols are predefined:
You can get a full list of X-keys via the xmodmap utility of UNIX by using the -pm and/or -pk options.
The values of keysyms for keys may be obtained via the /usr/openwin/demo/xev X-Window's UNIX utility.
KEY30 = 97, 65; LATIN LETTER a / A
; KEY30 = 0x61, 0x41; (XK_a, XK_A); just the same as the previous line
KEY80E= 255.84, 255.84; cursor DOWN / cursor DOWN
; KEY80E=0xff54, 0xff54; (XK_Down, XK_Down); just the same
Suppose that you selected to use the us.kmf file and you want to change the keyboard mapping for Up(8) and Down(2) keys of the additional keyboard and for the F1 key. You can find the following lines in the us.kmf file for them:
KEY59 = 0xffbe, 0xffbe ; (XK_F1,XK_F1)
KEY72E = 0xff52, 0xff52 ; (XK_Up,XK_Up)
KEY80E = 0xff54, 0xff54 ; (XK_Down,XK_Down)
By using the xev or xmodmap -pk commands on the SUN host, you can get keysyms for all keys. For example, you choose:
If you modify the lines of the us.kmf file as follows:
KEY59 = 0xff6a, 0xff6a ; (Help,Help)
KEY72E = 0xffcf, 0xffcf ; (Paste,Paste)
KEY80E = 0xffcd, 0xffcd ; (Copy,Copy)
you will emulate the "Help" (F1), "Copy" ("Down") and "Paste" ("Up") functions of the SUN keyboard.
Suppose that you use the us.kmf file and you want some keys of your keyboard to map to the SUN one. You can find the following lines in the us.kmf file:
KEY59 = 0xffbe, 0xffbe ; (XK_F1,XK_F1)
KEY60 = 0xffbf, 0xffbf ; (XK_F2,XK_F2)
KEY61 = 0xffc0, 0xffc0 ; (XK_F3,XK_F3)
KEY62 = 0xffc1, 0xffc1 ; (XK_F4,XK_F4)
KEY63 = 0xffc2, 0xffc2 ; (XK_F5,XK_F5)
KEY64 = 0xffc3, 0xffc3 ; (XK_F6,XK_F6)
KEY65 = 0xffc4, 0xffc4 ; (XK_F7,XK_F7)
KEY66 = 0xffc5, 0xffc5 ; (XK_F8,XK_F8)
KEY67 = 0xffc6, 0xffc6 ; (XK_F9,XK_F9)
KEY68 = 0xffc7, 0xffc7 ; (XK_F10,XK_F10)
If you change them to:
KEY59 = 0xffc8, 0xffc8, 0xffbe ; (XK_F11,XK_F11,XK_F1)
KEY60 = 0xffc9, 0xffc9, 0xffbf ; (XK_F12,XK_F12,XK_F2)
KEY61 = 0xffca, 0xffca, 0xffc0 ; (XK_F13,XK_F13,XK_F3)
KEY62 = 0xffcb, 0xffcb, 0xffc1 ; (XK_F14,XK_F14,XK_F4)
KEY63 = 0xffcc, 0xffcc, 0xffc2 ; (XK_F15,XK_F15,XK_F5)
KEY64 = 0xffcd, 0xffcd, 0xffc3 ; (XK_F16,XK_F16,XK_F6)
KEY65 = 0xffce, 0xffce, 0xffc4 ; (XK_F17,XK_F17,XK_F7)
KEY66 = 0xffcf, 0xffcf, 0xffc5 ; (XK_F18,XK_F18,XK_F8)
KEY67 = 0xffd0, 0xffd0, 0xffc6 ; (XK_F19,XK_F19,XK_F9)
KEY68 = 0xffd1, 0xffd1, 0xffc7 ; (XK_F20,XK_F20,XK_F10)
then the following keys of your keyboard will map to keys of the SUN keyboard:
F1 => F11/Stop
F2 => F12/Again
F3 => F13/Props
F4 => F14/Undo
F5 => F15/Font
F6 => F16/Copy
F7 => F17/Open
F8 => F18/Paste
F9 => F19/Find
F10 => F20/Cut
To get codes of F1 - F10 keys, you should press them together with the Alt-Gr key.
In many European languages (especially in France, Belgium and Holland), users need to enter some special characters by combining a Diacritic (or composer) character and a normal letter. For example, the user enters first the '^' sign and then the 'a' character, then this should result in the 'b' keysym.
The [KEYS] section does not determine composer characters. The Composers are only defined in the [COMPOSERS_XKK] section.
In the [COMPOSERS_XKK] section, each composer statement associates a set of key_ number map pairings with a keysym value.
Synopsis of the composer statement is:
COMPxx = key_number > key_number[S] [, key_number > key_number[S] ... ]
In the composer entry, COMP is the entry name and 'xx' is a decimal keysym value for a composer key (in the range of character codes). The '>' sign defines single code mapping (from the left to the right), while a comma separates possible map pairings. The 'S' character, if exists, allows both cases for a key_number mapping pair, otherwise lower case only.
If for a keysym value 'xx' of a key (say, KEYcc), a composer entry COMPxx exists in the [COMPOSERS_XKK] section (i.e. XServer can find it there), then the 'cc' value will not be sent to the X Client (otherwise, it will).
In the composer case, XServer will save the keysym value 'xx' until the user presses the next key. If the next key (say, KEYyy) is in the COMPxx entry (like 'yy > zz' in a pair), then XServer will send the value 'zz' from the pair to the X Client. If 'yy' is not found in the COMPxx entry, then XServer will send the composer's key_number 'cc' and the second key_number 'yy'.
Note that the values 'yy' and 'zz' are in the range of character codes.
Note that if Composer is pressed twice, then XServer will send the single value 'cc' to the X Client.
KEY18 = 0x65, 0x45; (XK_e, XK_E)
KEY22 = 0x75, 0x55; (XK_u, XK_U)
KEY23 = 0x69, 0x49; (XK_i, XK_I)
KEY24 = 0x6f, 0x4f; (XK_o, XK_O)
KEY30 = 0x61, 0x41; (XK_a, XK_A)
KEY41 = 94, 176; Circumflex Accent (^) / DEGREE SIGN, RING ABOVE
; KEY41 = 0x5e, 0xb0; (XK_asciicircum, XK_degree)
KEY162 = 0xe2, 0xc2; (XK_acircumflex, XK_Acircumflex)
KEY170 = 0xea, 0xca; (XK_ecircumflex, XK_Ecircumflex)
KEY174 = 0xee, 0xce; (XK_icircumflex, XK_Icircumflex)
KEY180 = 0xf4, 0xd4; (XK_ocircumflex, XK_Ocircumflex)
KEY187 = 0xfb, 0xdb; (XK_ucircumflex, XK_Ucircumflex)
; Definition of Circumflex Accent as a composer
In this example, if the user presses (normally) the key 41 which is the circumflex accent (on German keyboard), XServer will check if the keysym value 94 is found in the [COMPOSERS_XKK] section (the COMP94 entry), and if yes, then XServer will wait until the user enters the next character. If the next character is in the COMP94 entry (in our case 30), then XServer will send 162 to the X Client (both cases are allowed). If the second key_number is not found in the COMP94 entry, then XServer will send the composer's key_number (in our case 41) and the second key_number.
|belgian.kmf||Belgian Keyboard (for 102 Keyboard)|
|croatian.kmf||Croatian Keyboard (for 102 Keyboard)|
|danish.kmf||Danish Keyboard (for 102 Keyboard)|
|decemfr.kmf||DEC style Keyboard Mapping for a French Keyboard|
|decemfrc.kmf||DEC style Keyboard Mapping for a French Canadian Keyboard|
|decemgr.kmf||DEC style Keyboard Mapping for a German Keyboard|
|decemuk.kmf||DEC style Keyboard Mapping for a U.K. 102 English Keyboard|
|decemus.kmf||DEC style Keyboard Mapping for a U.S. Keyboard|
|dutch.kmf||Dutch Keyboard (for 102 Keyboard)|
|dvorak.kmf||Dvorak Keyboard (for 102 Keyboard)|
|finnish.kmf||Finnish Keyboard (for 102 Keyboard)|
|frencan.kmf||French Canadian Keyboard|
|jpn106.kmf||Japanese 106 Keyboard|
|latinam.kmf||Latin American Keyboard|
|msus.kmf||Microsoft U.S. English Keyboard|
|polish.kmf||Polish Keyboard (for 102 Keyboard)|
|portbraz.kmf||Portuguese (Brazilian) Keyboard|
|rus.kmf||Russian Keyboard (for 102 Keyboard)|
|rusalt.kmf||Russian Alternative Keyboard (for 102 Keyboard)|
|slovenia.kmf||Slovenian Keyboard (for 102 Keyboard)|
|swissfre.kmf||Swiss French Keyboard|
|swissger.kmf||Swiss German Keyboard|
|uk101.kmf||U.K. 101 English Keyboard|
|uk102.kmf||U.K. 102 English Keyboard|
|uk102m.kmf||U.K. 102 English Keyboard (for SWISSGER 102 Keyboard)|
|us.kmf||U.S. English Keyboard|
|userkbd.kmf||User-defined keyboard mapping|
|< previous | content | next >|
|Copyright © 1999 - 2009 LabtamTM Inc.|