This page is a part of VPortPro online Help Manual.
VPortPro-client with Com Port Control by Labtam.
VPortPro makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on virtual serial ports of your PC. Visit Home of VPortPro for more information.



Configuring a Connection Channel

When you select a connection channel in the VCOM-TCP Primary Client window and click the Configure button, the Configuring a Connection dialog brings up:

Each connection channel has its own settings displayed in the dialog to reflect the settings you have made for that COM port.

This dialog lets you change parameter values for a connection channel selected from the connection channel list. These parameters are similar to those displayed in the Add dialog box. (Refer to section Adding a Connection Channel above.)

Additionally, you can specify whether VCOM-TCP Primary Client will restart (according to reconnection parameters you can enter) or not when the connection fails.

To configure an existing connection channel:

  1. In the VCOM-TCP Primary Client window, select a connection channel
  2. Make Initial settings for the serial port parameters
  3. Specify a TCP/IP address of a server
  4. Specify a TCP/IP port number of the server
  5. In the Protocol Type box, choose a transport data stream protocol type
  6. Press OK

Your changes become effective when you click the OK button.




Home | Product | Download | Order Now | Upgrade | Support | Pricing | Company Information | Contact Us


Labtam Copyright 1999 - 2007 LabtamTM Inc.