This page is a part of XConnectPro online Help Manual.
XConnectPro is X Server for windows by Labtam bringing your PC to Unix and X-Windows. Visit Home of X Server for windows for more information.



Single Window Mode

This mode presents all X clients in a single X-session window. Within the window, the window management and all other functions are typically controlled by an X Window System manager you start on a host (e.g., olwm, CDE, twm, mwm, etc.).

If you want to use a remote window manager, you should use the XDMCP method or start a remote window manager from the UNIX host (e.g., start xterm and then start the required window manager from the xterm window).

The X-session window itself can be sized and moved like any Microsoft Windows window. You can use scroll bars to display all parts of the virtual screen. Pressing a scroll arrow will move the window a pixel at a time. Dragging the scroll elevator or clicking on either side of the elevator will move the window more rapidly.

Note: the local mwm program (based on OpenMotif 2.0) may be useful in this mode to provide windows managing functions (moving, resizing, etc.). This allows not using a remote window manager. You can launch the local mwm program from the X-session's Run menu.

Functions that affect XServer as a whole can be selected from the X-session's Control Menu. This menu will be presented when you click on a box at the top left corner of the X-session window.

The Edit menu gives you access to all XConnectPro Copy & Paste commands. A number of these commands specify the current X Selection as the source or target of the command (see A Note on Copy and Paste earlier in this chapter).


Example of Initiating a Login Session by Using REXEC to Start xterm

First, make sure that your remote host is accessible from your PC (e.g., with the Ping utility) and supports the REXEC protocol. Also, make sure that your PC is accessible from your remote host. If OK, then you may initiate a login session by using REXEC like the following steps:

1) Specifying required settings

  • Start XSettings by double-clicking on the XSettings icon from the XConnectPro Programs' folder (the XSettings window should appear)

  • Select Single from the Window Mode List

  • Disable the Use XDMCP check box from the XDMCP section

  • Specify other required settings

  • Click OK to save your settings and exit XSettings

2) Initiating X-session

  • Start XServer by double-clicking on the XSession icon from the XConnectPro Programs' folder (the empty X-session window should appear)

3) Initiating the Startup session

  • Start Startup by double-clicking on the Startup icon from the XConnectPro Programs' folder (or from the Run menu of XServer); the Startup window should appear

  • Choose REXEC in the Start Method section

  • Enter the network name or IP address for the remote host you want to connect to in the Host Name/IP Address field in the Login section

  • Enter your User Name in the User ID field

  • Enter your Password required for your login to the remote system

  • In the Command field, enter the following line
    /usr/X11R6/bin/xterm -display $(LOCALIP):0
  • Specify other required settings

  • Click the Execute button

Note: The path to xterm depends on the operating system's configuration used on the host (e.g., the path may be /usr/bin/X11/xterm).

The xterm window should appear on your display. You can then interact with the host by typing commands in the window and starting remote applications (e.g., xclock).






Home | Product | Download | Order Now | Upgrade | Support | Pricing | Company Information | Contact Us


Labtam Copyright 1999 - 2009 LabtamTM Inc.