This page is a part of XLitePro online Help Manual.
|6. Configuring XLitePro||< previous | content | next >|
The Telnet menu bar displays five items: Commands, Edit, Options, View, and Help. They are described below.
The Help menu contains the following menu commands:
Displays the Telnet help file.
Displays copyright, version and program information about Telnet.
The Commands menu contains the following menu commands:
The Connect item displays the Telnet Connect Host dialog box so you can specify the remote system you want to communicate with. You can also connect to a port or service to use other than the standard Telnet port. This is useful when the Telnet client is being used to access something other than a Telnet daemon.
This command is not available when you are already connected to a remote system.
Once you connect to the remote system, the title bar in the Telnet window shows the remote system name.
The Disconnect item ends the connection to a remote system so you can connect to another system or end your session. This command is not available when you are not connected to a remote system.
This command sends the Telnet Interrupt Process command (IP control function) to the remote host. This command (which suspends, interrupts, aborts, or terminates the operation of a user process) tells the host to stop the current process to which the terminal is connected. This function is frequently used when a user believes his process is in an unending loop, or when an unwanted process has been inadvertently activated.
This command sends the Telnet Abort Output command (AO control function) to the remote host. This command tells the host to run to completion the current process, which is generating output, but without sending the output to the user's terminal from the host. Further, this function typically clears any output already produced but not yet actually sent to the user's terminal.
This command sends the Telnet Break command (BREAK control function) to the remote host. This command (intended to indicate that the Break Key or the Attention Key was hit) tells the host to stop what it is doing.
This command sends the Telnet Are You There command (AYT control function) to the remote host. This command determines if the connection with the host is still up and the system is running. This command tells the host to send back to the user's terminal some visible evidence that the command was received. This function may be invoked by the user when the system is unexpectedly 'silent' for a long time, because of the unanticipated (by the user) length of a computation, an unusually heavy system load, etc.
This command pauses output (it sends Ctrl+S to the host). The Resume Output item then becomes active and can be selected.
This command resumes output (it sends Ctrl+Q to the host) after output has been paused.
The Exit item terminates the Telnet session.
The Edit menu displays two commands that allow you to edit the lines you type in a Telnet window: Erase Character and Erase Line. Also there are two standard commands, Copy and Paste, for text operations with the Microsoft Windows' clipboard.
The host should delete the last preceding undeleted character or print position from the data stream being supplied by the user. A print position may contain several characters that are the result of overstrikes, or of sequences such as <char1> BS <char2>...
The host should delete all the data in the current line of input, i.e. characters from the data stream back to, but not including, the last CR LF sequence sent over the TELNET connection.
To copy text onto the clipboard, leaving the original text intact and replacing the previous clipboard contents, select the text you want to copy, and choose Copy. This command is unavailable until you have selected text.
When there is text in the clipboard, you can use Paste to insert a copy of the clipboard contents at the insertion point to the Telnet window, or to another Microsoft Windows application. This command is not available if the clipboard is empty.
There are several ways in using Copy and Paste. The first example will be to show using your mouse.
The second example will be to show using Menus.
To Copy and Paste, you can also use key combinations, "Ctrl+C"/"Ctrl+V" or
For more information, see settings CtrlCVmode and QuickClipBoard.
See also settings SelectRect and FineSelectMode that you can use to specify different modes for text selection in your Telnet window.
With options from this menu, you can navigate through the output buffer of your session. For additional information, refer to subsection Details of a Session in section Starting and Terminating Telnet.
The Actual Screen is the one that always displays the last line of the session's output. In this screen, you can only input your commands.
The First Extend Screen option displays lines for the first screen of the output buffer. The Prec Extend Screen option displays lines for the preceding screen (if any) from the current one. The Next Extend Screen option takes you to the next screen (if any) from the current one.
These options are only used for reviewing (not for entering) information and moving to screens. They suspend output into the output buffer and disable your input. To resume output and enable input, use the Actual Screen option.
To navigate through the output buffer, you can also use the Notepad-like view-key combinations.
The Find option lets you search text in the output buffer like you do that when using Notepad.
Telnet allows you to personalize your settings and automatically use them every time you establish a connection to a remote computer. This is accomplished by storing your personalized settings in the corresponding ini-files. The Options menu displays items that you can choose to specify particular implementations of Telnet. Normally they do not have to be changed.
|6. Configuring XLitePro||< previous | content | next >|
|Copyright © 1999 - 2009 LabtamTM Inc.|